<< BACK

M4300-96X

M4300-96X

1/10G/40G L3, 96 Port L3 switch L3 Stackable fully Managed switch

  • Features & Benefits
  • Specifications
Key features
  • Cost effective 1G access layer in campus LAN networks, and high performance 10G distribution layer for midsize organizations networks
  • Zero Touch AV-over-IP with pre-configured L2 Multicast on all 1G models (1G AV encoders and decoders) and 10G models (SDVoE-ready)
  • Advanced Layer 2, Layer 3 and Layer 4 feature set - no license required - including Policy Based Routing, RIP, VRRP, OSPF and PIM
  • Innovative mixed "Spine and Leaf", 1G and 10G stacking with nonstop forwarding and hitless failover redundancy
  • Low acoustics, half-width 16-port and 24-port 10G models can be paired in a single rack space for redundant Top of Rack
  • Up to 384 (Gigabit) ports, 768 (10 Gigabit) ports, 192 (40 Gigabit) ports or a combination in a stack seen as one “logical” switch
  • PoE+ (30 watts per port) with hot swap, redundant power supplies and full provisioning
  • 48- and 96-port 10G models’ ultra-low latency and scalable table size with 128K MAC, 8K ARP/NDP, 4K VLANs, 12K routes
  • Mixed Stack of 1G and 10G models provides 16K MAC, 2K ARP/NDP, 4K VLANs and 512 routes
  • SDN-Ready OpenFlow 1.3 support for maximum investment protection

    • Software
  • Advanced classifier-based, time-based hardware implementation for L2 (MAC), L3 (IP) and L4 (UDP/TCP transport ports) security and prioritization
  • Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any type of Ethernet channeling
  • Voice VLAN with SIP, H323 and SCCP protocols detection and LLDP-MED IP phones automatic QoS and VLAN configuration
  • Efficient authentication tiering with successive DOT1X, MAB and Captive Portal methods for streamlined BYOD
  • Comprehensive IPv4/IPv6 static and dynamic routing including Proxy ARP, OSPF, Policy-based routing and automatic 6-to-4 tunneling
  • Enhanced IPv4/IPv6 multicast forwarding with IGMPv3/MLDv2 ASM and SSM Proxy and Control Packet Flooding protection
  • High performance IPv4/IPv6 multicast routing with PIM timer accuracy and unhandled PIM (S,G,rpt) state machine events transitioning
  • Advanced IPv4/IPv6 security implementation including malicious code detection, DHCP Snooping, IP Source Guard protection and DoS attacks mitigation
  • Innovative multi-vendor Auto-iSCSI capabilities for easier virtualization optimization

    • Availability
  • Dual redundant, modular power supplies equipping full width models contribute to business continuity management
  • Vertical or horizontal flexible stacking with management unit hitless failover and nonstop forwarding across operational stack members
  • Spine and leaf architecture with every leaf switch (1G access switches) connecting to every spine switch (distributed 10G "core" switches)
  • Stacking and distributed link aggregation allow for multi-resiliency with zero downtime and load balancing capabilities
  • Link Dependency new feature enables or disables ports based on the link state of different ports
  • Per VLAN Spanning Tree and Per VLAN Rapid Spanning Tree (PVSTP/PVRSTP) offer interoperability with PVST+ infrastructures

    • Management
  • DHCP/BootP innovative auto-installation including firmware and configuration file upload automation
  • Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow and RSPAN remote mirroring implementation
  • Service port for out-of-band Ethernet management (OOB)
  • Standard RS232 straight-through serial RJ45 and Mini-USB ports for local management console
  • Standard USB port for local storage, logs, configuration or image files
  • Dual firmware image and configuration file for updates with minimum service interruption
  • Industry standard command line interface (CLI) for IT admins used to other vendors commands
  • Fully functional Web console (GUI) for IT admins who prefer an easy to use graphical interface
  • Single-pane-of-glass NMS300 management platform with mass-configuration support

    • NETGEAR Warranty
  • This product is backed by a NETGEAR ProSAFE® Limited Lifetime Hardware Warranty.
  • Lifetime Next Business Day Hardware Replacement. Click here for coverage, availability and terms and conditions.
  • ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days (Remote diagnostics performed by our technical experts for prompt resolution of technical issues). ProSUPPORT coverage can be extended by Purchasing one, three, or five year contracts.
  • ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat.
    •
    Product Number M4300-96X
    Model Description 12-Slot Modular Stackable Managed Switch with 8-port 10G and 2-port 40G expansion cards
    Datasheet (PDF) M4300 Datasheet
    Datasheet (Excel) M4300 Excel
    Ordering Number XSM4396K0 (empty switch, no PSU)
    XSM4396K1 (48-port 10G fiber SFP+ starter kit with one APS600W PSU)
    Acoustics Without PoE: 35.8dB @ 25°C (77°F)
    With max PoE load: 66.8dB @ 25°C (77°F)
    Power Consumption (Max) Without PoE: 566 Watts
    With 1,440W PoE: 2,006 Watts
    10G RJ45 Ports 0 to 96 x 10GBASE-T (Fast Ethernet, 1G, 2.5G, 5G, and 10G speeds)
    APM408C is the 8 x 10GBASE-T port card
    APM408P is the 8 x 10GBASE-T PoE+ port card
    10G Fiber SFP+ Ports 0 to 96 x SFP+ (1G and 10G speeds)
    APM408F is the 8 x SFP+ port card
    40G Fiber QSFP+ Ports 0 to 24 x QSFP+ (4x10G and 40G speeds)
    APM402XL is the 2 x 40G QSFP+ port card
    Power over Ethernet 0 to 48 x 10G PoE+ 30W
    Only the top 6 slots (out of 12) can support PoE+ operation
    APS1200W PSU is preferred for PoE+ operation
    PoE Budget (Watts) 0W PoE Budget with 1 x APS600W PSU @ 110V/220V AC input
    634W PoE Budget with 2 x APS600W PSUs in shared EPS mode @ 110V/220V AC input
    720 W PoE Budget with 1 x APS1200W PSU @ 110V/220V AC input
    720 W PoE Budget with 2 x APS1200W PSUs in redundant RPS mode @ 110V/220V AC input
    1,084 W PoE Budget with APS600W + APS1200W PSUs in shared EPS mode @ 110V/220V AC input
    1,440 W PoE Budget with 2 x APS1200W PSUs in shared EPS mode @ 110V/220V AC input
    Feature Set Layer 3 (static, policy-based and RIP OSPF VRRP PIM dynamic routing)
    Management Ports 1G Ethernet service port for out-of-band management (OOB, RJ45)
    RS232 straight-through serial RJ45 for local management console
    Mini-USB port for local management console
    USB port for local storage, logs, configuration or image files
    Form Factor 2RU modular switch that comes either empty or in a starter kit with 48 SFP+ port
    Full width with dual, redundant modular PSUs for business continuity
    APS600W is the 600W power supply unit for non-PoE applications
    APS1200W is the 1,200W power supply unit for PoE applications